-
- Driveway and pedestrian gates, fence panels
-
- Assorted cast and wrought fence panels
Driveway, farm and pedestrian gates regularly are found in our shop in wrought, flat bar, and cast iron.
Fence panels and sets in cast iron and steel. It is possible to have additional cast iron panels recast in cast iron or aluminium if required.
Feel free to call or email if you would like more information on sales@federationtrading.com.au ph (08) 8212 3400
Updated 12 July 2020
-
- Original Victorian, cast iron driveway gate pair, large proportions and heavy. width 360cm x height 209cm $4400
-
- detail of original Victorian, cast iron driveway gate pair, large proportions and heavy. width 360cm x height 209cm $4400
-
- detail of original Victorian, cast iron driveway gate pair, large proportions and heavy. width 360cm x height 209cm $4400
-
- Lovely pair of early blacksmith driveway gates with reproduction cast iron posts, 3610 mm wide, $ 3300 the set including posts. Set 1( image showing one of the pairs of gates )
-
- Posts for the blacksmithed driveway gates, 1800 mm tall with brackets and pins to suit gates
-
- 2 x pairs of blacksmithed driveways gates approx w 3120xh1100mm $1400 each pair. Matching pedestrian gate w1080xh1100mm $650
-
- 2 x pairs of blacksmithed driveways gates approx w 3120xh1100mm $1400 each pair. Matching pedestrian gate w1080xh1100mm $650
-
- Cast iron fence panels and posts approx 13 metres, panel dimensions length 1190mm x height 490mm, 11 panels and 8 posts, $2200 for the set
-
- Lovely pair of Victorian driveway gates with cast iron posts, gates measure 3360 mm tight x 1500 mm tall ,plus posts and hinging, $ 3000 the set
-
- Victorian wrought iron driveway gates , 3670 mm wide ( tight ) x 1500 mm tall, $ 2200
-
- Detail of hoop and spear fence panels, height 78cm, over 15m in total length,
-
- Hoop and spear fence panels, height 78cm, over 15m in total length, 2m panels $290 each, 2.4m panels $345 each
-
- steel security / fence panels, 2 available $350 each 1935w x 1960h
-
- Detail of steel security / fence panels, 2 available $350 each 1935w x 1960h
-
- Cast iron fence posts for square bar rails, powder coated in black, height 440 x width 88mm Please note: rails not included. $125 each post, 14 available
-
- Recast iron finials/ gate spears, Finial No.1 $30 each
-
- Recast iron finials/ gate spears, Finial No.2 $30 each
-
- Recast iron finials/ gate spears, Finial No.3 $30 each
-
- Assorted fence panels, cast iron, round bar, spears, most in lengths between 1600-1800mm
-
- Decorative panel, cast iron in steel frame , 950mm wide x 1400mm tall , $440
-
- Cyclone gates assorted pedestrian to driveway size from $60
-
- decorative wrought iron panel , 375 mm x 1220 mm , $ 220
-
- Very large blacksmith made driveway gates from the Victorian era, 3580 mm wide x 1800 mm tall , outside height to the bull horn is 2100 mm , $4000 the pair
-
- Decorative panels with posts, showing one panel from the pair of panels, each panel is 1660 mm long including post, panel height , rail to rail is 900 mm , rail to spear is 1140 mm , post height is 1540 mm , $ 650 the pair
-
- Recast cast iron fence spears, height 180mm, 100 plus available $8 each
-
- Steel frame door 660 x 2225mm $95
-
- Metal arched top gates , 2 are 800 mm wide x 1940 mm tall , the other is 800mm wide x 1735mm tall , $345 each
-
- Heavy cast iron balustrade panels , , w720 x h680mm $200 each panel, approx total length 6.5m. Additional panels can be ordered – please enquire as to recasting cost
-
- Detail of cap , on the pair of cast iron gate posts
-
- Lovely simple pair of cast iron gate posts , 1425 mm tall , top cap is 180 mm wide , square bottom section is 135 mm , $ 1290 the pair
